Cisco Cisco Email Security Appliance C650 Referencia técnica
3-256
CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
SMTP Services Configuration
•
Exporting a RAT
•
Clearing the default access
Example - Adding a listener
In the following example, the
listenerconfig
command is used to create a new private listener called
OutboundMail that can be used for the B listener needed in the Enterprise Gateway configuration. (Note:
you also had the option to add this private listener during the GUI’s System Setup Wizard CLI
you also had the option to add this private listener during the GUI’s System Setup Wizard CLI
systemsetup
command.)
A private listener type is chosen and named OutboundMail. It is specified to run on the PrivateNet IP
interface, using the SMTP protocol over port 25. The default values for the Host Access Policy for this
listener are then accepted.
interface, using the SMTP protocol over port 25. The default values for the Host Access Policy for this
listener are then accepted.
mail3.example.com> listenerconfig
Currently configured listeners:
1. InboundMail (on PublicNet, 192.168.2.1) SMTP TCP Port 25 Public
Choose the operation you want to perform:
- NEW - Create a new listener.
listenerconfig edit <name> rcptacess export <filename>
listenerconfig edit <name> rcptacess clear <default_access>
Table 3-16
listenerconfig
Argument Values - RAT
Argument
Description
<rat_addr>
Enter the hosts to add. Hosts can be formatted as
follows:
follows:
CIDR addresses (10.1.1.0/24)
Hostname (crm.example.com)
Partial Hostname (.example.com)
Usernames (postmaster@)
Full email addresses (joe@example.com,
joe@[1.2.3.4]
joe@[1.2.3.4]
Note
Separate multiple hosts with commas
<options>
--action
Action to apply to address(es). Either “Accept” or
“Reject”. Default is “Accept”.
“Reject”. Default is “Accept”.
--cust_resp
Specify a custom SMTP response. “No” or SMTP
acceptance response string.
acceptance response string.
--resp_code
Custom SMTP response code. Default is 250 for
“Accept” actions, 550 for “Reject”.
“Accept” actions, 550 for “Reject”.
--bypass_rc
Bypass receiving control. Default is “No”.
--bypass_la
Bypass LDAP Accept query. Either “Yes” or
“No.”
“No.”