Cisco Cisco Email Security Appliance C190 Referencia técnica
3-171
CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
Networking Configuration / Network Tools
Current Settings:
Maximum File Size: 200 MB
Limit: None (Run Indefinitely)
Interface(s): ALL
Filter: (tcp port 25)
Choose the operation you want to perform:
- START - Start packet capture.
- SETUP - Change packet capture settings.
[]> start
Success - Packet Capture has started
Capture Information:
File Name: C100V-421C73B18CFB05784A83-B03A99E71ED8-20150312-105256.cap
File Size: 0 of 200M
Duration: 0s
Limit: None (Run Indefinitely)
Interface(s): ALL
Filter: (tcp port 25)
Choose the operation you want to perform:
- STOP - Stop packet capture.
- STATUS - Display current capture status.
- SETUP - Change packet capture settings.
[]> stop
Success - Packet Capture has stopped
Capture Information:
File Name: C100V-421C73B18CFB05784A83-B03A99E71ED8-20150312-105256.cap
File Size: 24 of 200M
Duration: 10s
Limit: None (Run Indefinitely)
Interface(s): ALL
Filter: (tcp port 25)
Choose the operation you want to perform:
- START - Start packet capture.
- SETUP - Change packet capture settings.
[]> setup
Enter maximum allowable size for the capture file (in MB)
[200]>
Do you want to stop the capture when the file size is reached? (If not, a new file will be
started and the older capture data will be discarded.)
[N]>
The following interfaces are configured:
1. Management
2. ALL
Enter the name or number of one or more interfaces to capture packets from, separated by
commas (enter ALL to use all interfaces):
[2]>
Select an operation. Press enter to continue with the existing filter.
- PREDEFINED - PREDEFINED filter.
- CUSTOM - CUSTOM filter.
- CLEAR - CLEAR filter.
[]>
Capture settings successfully saved.