Cisco Cisco Email Security Appliance C190 Referencia técnica
3-27
CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
Cluster Management
•
clusterconfig join [--port=xx] <ip_of_remote_cluster> [<admin_password>]<groupname>
—
This will add this machine to a cluster.
<ip_of_remote_cluster>
- The IP address of another machine in the cluster.
<admin_password >
- The admin password of the cluster. This should not be
specified if joining over CCS.
<groupname>
- The name of the group to join.
<port>
- The port of the remote machine to connect to (defaults to 22).
•
clusterconfig prepjoin print
This will display the information needed to prepare the joining of this machine to a cluster over a CCS
port.
port.
Cluster Commands
The following commands are available when you are in a cluster.
•
clusterconfig addgroup <groupname> —
Creates a new cluster group. The group starts off with
no members.
•
clusterconfig renamegroup <old_groupname> <new_groupname> —
Change the name of a cluster
group.
•
clusterconfig deletegroup <groupname> [new_groupname] —
Remove a cluster group.
<groupname>
- Name of the cluster group to remove.
<new_groupname>
- The cluster group to put machines of the old group into.
•
clusterconfig setgroup <machinename> <groupname> —
Sets (or changes) which group a
machine is a member of.
<machinename
> - The name of the machine to set.
<groupname>
- The group to set the machine to.
•
clusterconfig removemachine <machinename> —
Remove a machine from the cluster.
•
clusterconfig setname <name> —
Changes the name of the cluster to the given name.
•
clusterconfig list —
Display all the machines currently in the cluster.
•
clusterconfig connstatus —
Display all the machines currently in the cluster and add routing
details for disconnected machines.
•
clusterconfig disconnect <machinename> —
This will temporarily detach a machine from the
cluster.
<machinename>
- The name of the machine to disconnect.
•
clusterconfig reconnect <machinename> -
This will restore connections with machines that
were detached with the “disconnect” command.
•
clusterconfig prepjoin new <serial_number> <hostname> <user_key> —
This will add a new
host that is to join the cluster over the CCSport.
<serial_number>
- The serial number of the machine being added.
<hostname>
- The host name of the machine being added.