Cisco Cisco Email Security Appliance C160 Referencia técnica
3-229
Cisco AsyncOS 8.5.6 CLI Reference Guide
Chapter 3 The Commands: Reference Examples
Networking Configuration / Network Tools
interfaceconfig
Description
Configure the interface. You can create, edit, or delete interfaces. You can enable FTP, change an IP
address, and configure Ethernet IP addresses.
address, and configure Ethernet IP addresses.
Usage
Commit: This command requires a ‘commit’.
Cluster Management: This command is restricted to machine mode.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the
interfaceconfig
command can be used to perform all the fuctions of the
traditional CLI command.
•
Creating a new interface
Choose the operation you want to perform:
- DISABLE - Disable Loopback Interface.
[]>
Choose the operation you want to perform:
- MEDIA - View and edit ethernet media settings.
- PAIRING - View and configure NIC Pairing.
- VLAN - View and configure VLANs.
- LOOPBACK - View and configure Loopback.
[]>
Table 3-113
etherconfig
Enabling the Loopback Interface (Continued)
interfaceconfig new <name>
<ethernet interface>
<hostname>
--ip=IPv4 Address/Netmask