Cisco Cisco Email Security Appliance C650 Referencia técnica
100
Cisco AsyncOS 8.0.1 CLI Reference Guide
Chapter
reboot
Description
Restart the appliance.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode.
Batch Command: This command does not support a batch format.
Example
Table 3-51
reboot
mail3.example.com> reboot
Enter the number of seconds to wait before abruptly closing connections.
[30]>
Waiting for listeners to exit...
Receiving suspended.
Waiting for outgoing deliveries to finish...
Mail delivery suspended.
remotepower
Description
Configure the ability to remotely reset power to the appliance chassis using a third-party Intelligent
Platform Management Interface (IPMI) tool that supports version 2.0. The following IPMI commands
are supported:
Platform Management Interface (IPMI) tool that supports version 2.0. The following IPMI commands
are supported:
status, on, off, cycle, reset, diag, soft
.
This command runs only on the following hardware: C380 and C680, M380 and M680, and S380 and
S680.
S680.
You will need a dedicated IPv4 address for the Remote Power Management interface. This interface is
configurable only via the
configurable only via the
remotepower
command; it cannot be configured using the
ipconfig
command.
The username and password that you specify with this command will be required in order to remotely
reset appliance power.
reset appliance power.