Cisco Cisco Email Security Appliance X1050 Referencia técnica
215
Cisco AsyncOS 8.0.1 CLI Reference Guide
Chapter
Using the failover Subcommand for NIC Pairing
In this example, a manual failover is issued, forcing the Data 2 interface to become the primary interface.
Note that you must issue the
Note that you must issue the
status
sub-command to see the change in the CLI.
Backup (Data 2) Standby, Link is up
Choose the operation you want to perform:
- FAILOVER - Manually failover to other port.
- DELETE - Delete a pairing.
- STATUS - Refresh status.
[]>
Table 3-111
etherconfig
- Enabling NIC Pairing (Continued)
Table 3-112
etherconfig
- Issuing a Manual Failover Command
mail3.example.com> etherconfig
Choose the operation you want to perform:
- MEDIA - View and edit ethernet media settings.
- PAIRING - View and configure NIC Pairing.
- VLAN - View and configure VLANs.
- LOOPBACK - View and configure Loopback.
[]> pairing
Paired interfaces:
1. Pair 1:
Primary (Data 1) Active, Link is up
Backup (Data 2) Standby, Link is up
Choose the operation you want to perform:
- FAILOVER - Manually failover to other port.
- DELETE - Delete a pairing.