Cisco Cisco Email Security Appliance X1050 Referencia técnica
53
Cisco AsyncOS 8.5.5 CLI Reference Guide
Chapter 3 The Commands: Reference Examples
Configuration File Management
mailconfig
Description
To test the configuration, you can use the
mailconfig
command immediately to send a test email
containing the system configuration data you just created with the
systemsetup
command.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command can be used in all three machine modes (cluster, group, machine).
Batch Command: This command does not support a batch format
Example
Send the configuration to a mailbox to which you have access to confirm that the system is able to send
email on your network.
email on your network.
resetconfig
Description
When physically transferring the appliance, you may want to start with factory defaults. The
r
r
esetconfig
command resets all configuration values to factory defaults. This command is extremely
destructive, and it should only be used when you are transferring the unit or as a last resort to solving
configuration issues. It is recommended you run the
configuration issues. It is recommended you run the
systemsetup
command after reconnecting to the
CLI after you have run the
resetconfig
command.
Table 3-17
mailconfig
mail3.example.com> mailconfig
Please enter the email address to which you want to send
the configuration file. Separate multiple addresses with commas.
[]> user@example.com
The configuration file has been sent to user@example.com.
mail3.example.com>