Cisco Cisco Email Security Appliance C650 Referencia técnica
Chapter
110
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
Using the diagnostic Command
The following commands are available within the
diagnostic
submenu:
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further
restricted to the login host (i.e., the specific machine you are logged onto). This
command requires access to the local file system.
restricted to the login host (i.e., the specific machine you are logged onto). This
command requires access to the local file system.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the diagnostic command can be used to check RAID status,
clear caches and show the contents of the ARP cache. To invoke as a batch
command, use the following formats:
clear caches and show the contents of the ARP cache. To invoke as a batch
command, use the following formats:
•
Check the RAID status
Table 3-38
diagnostic
Subcommands
Option
Sub commands
Availability
RAID
1. Run disk verify
Available on C30 and C60 only.
2. Monitor tasks in
progress
progress
3. Display disk verify
verdict
verdict
NETWORK
FLUSH
C-, X-, and M-Series
ARPSHOW
SMTPPING
TCPDUMP
diagnostic raid