Cisco Cisco Email Security Appliance C650 Referencia técnica
35
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
Chapter
clusterconfig
Description
The
clusterconfig
command is used to configure cluster-related settings. If this
machine is not part of a cluster, running clusterconfig will give you the option of
joining a cluster or creating a new cluster.
joining a cluster or creating a new cluster.
The
clusterconfig
command provides additional subcommands:
Non-Cluster Commands
The following commands are available when you are not in a cluster.
•
clusterconfig new <name> —
This will create a new cluster with the given
name. This machine will be a member of this cluster and a member of a
default cluster group called "Main Group".
default cluster group called "Main Group".
<name>
- The name of the new cluster.
•
clusterconfig join [--port=xx] <ip_of_remote_cluster>
[<admin_password>]<groupname> —
This will add this machine to a cluster.
<ip_of_remote_cluster>
- The IP address of another machine in the
cluster.
<admin_password >
- The admin password of the cluster. This should not
be
specified if joining over CCS.
<groupname>
- The name of the group to join.
<port>
- The port of the remote machine to connect to (defaults to 22).
•
clusterconfig prepjoin print
This will display the information needed to prepare the joining of this machine
to a cluster over a CCS port.
to a cluster over a CCS port.
Cluster Commands
The following commands are available when you are in a cluster.
•
clusterconfig addgroup <groupname> —
Creates a new cluster group. The
group starts off with no members.