Cisco Cisco Email Security Appliance C170 Referencia técnica
309
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
Chapter
Note
You must use Control-C to end the
ping
command.
routeconfig
Description
The
routeconfig
command allows you to create, edit, and delete static routes for
TCP/IP traffic. By default, traffic is routed through the default gateway set with
the
the
setgateway
command. However, IronPort AsyncOS allows specific routing
based on destination.
Routes consist of a nickname (for future reference), a destination, and a gateway.
A gateway (the next hop) is an IP address such as
A gateway (the next hop) is an IP address such as
10.1.1.2
. The destination can
be one of two things:
64 bytes from 10.19.0.31: icmp_seq=5 ttl=64 time=0.125 ms
64 bytes from 10.19.0.31: icmp_seq=6 ttl=64 time=0.124 ms
64 bytes from 10.19.0.31: icmp_seq=7 ttl=64 time=0.122 ms
64 bytes from 10.19.0.31: icmp_seq=8 ttl=64 time=0.126 ms
64 bytes from 10.19.0.31: icmp_seq=9 ttl=64 time=0.133 ms
64 bytes from 10.19.0.31: icmp_seq=10 ttl=64 time=0.115 ms
^C
--- anotherhost.example.com ping statistics ---
11 packets transmitted, 11 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.115/0.242/1.421/0.373 ms
^C
Table 3-116
ping
(Continued)