Cisco Cisco Email Security Appliance X1050 Referencia técnica
Chapter
2
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
Accessing the Command Line Interface (CLI)
Access to the CLI varies depending on the management connection method
chosen while setting up the appliance. The factory default username and password
are listed next. Initially, only the admin user account has access to the CLI. You
can add other users with differing levels of permission after you have accessed the
command line interface for the first time via the admin account. The system setup
wizard asks you to change the password for the admin account. The password for
the admin account can also be reset directly at any time using the
chosen while setting up the appliance. The factory default username and password
are listed next. Initially, only the admin user account has access to the CLI. You
can add other users with differing levels of permission after you have accessed the
command line interface for the first time via the admin account. The system setup
wizard asks you to change the password for the admin account. The password for
the admin account can also be reset directly at any time using the
password
command.
To connect via Ethernet: Start an SSH or Telnet session with the factory default
IP address 192.168.42.42. SSH is configured to use port 22. Telnet is configured
to use port 23. Enter the username and password below.
IP address 192.168.42.42. SSH is configured to use port 22. Telnet is configured
to use port 23. Enter the username and password below.
To connect via a Serial connection: Start a terminal session with the
communication port on your personal computer that the serial cable is connected
to. See the “Setup and Installation” chapter in the Cisco IronPort AsyncOS
Configuration Guide for more information. Enter the username and password
below.
communication port on your personal computer that the serial cable is connected
to. See the “Setup and Installation” chapter in the Cisco IronPort AsyncOS
Configuration Guide for more information. Enter the username and password
below.
Log in to the appliance by entering the username and password below.
Factory Default Username and Password
•
Username:
admin
•
Password:
ironport
For example:
Command Line Interface Conventions
This section describes the rules and conventions of the AsyncOS CLI.
login: admin
password: ironport