Cisco Cisco Email Security Appliance X1050 Referencia técnica
499
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
Chapter
Example - Adding a listener
In the following example, the
listenerconfig
command is used to create a new
private listener called OutboundMail that can be used for the B listener needed in
the Enterprise Gateway configuration. (Note: you also had the option to add this
private listener during the GUI’s System Setup Wizard CLI
the Enterprise Gateway configuration. (Note: you also had the option to add this
private listener during the GUI’s System Setup Wizard CLI
systemsetup
command.)
A private listener type is chosen and named OutboundMail. It is specified to run
on the PrivateNet IP interface, using the SMTP protocol over port 25. The default
values for the Host Access Policy for this listener are then accepted.
on the PrivateNet IP interface, using the SMTP protocol over port 25. The default
values for the Host Access Policy for this listener are then accepted.
--resp_code
Custom SMTP response code. Default is 250 for
“Accept” actions, 550 for “Reject”.
“Accept” actions, 550 for “Reject”.
--bypass_rc
Bypass receiving control. Default is “No”.
--bypass_la
Bypass LDAP Accept query. Either “Yes” or
“No.”
“No.”
Table 3-167
listenerconfig
Argument Values - RAT
Table 3-168
listenerconfig - Adding a listener
mail3.example.com> listenerconfig
Currently configured listeners:
1. InboundMail (on PublicNet, 192.168.2.1) SMTP TCP Port 25 Public
Choose the operation you want to perform:
- NEW - Create a new listener.
- EDIT - Modify a listener.
- DELETE - Remove a listener.
- SETUP - Change global settings.
[]> new