Cisco Cisco Email Security Appliance C650 Referencia técnica
Chapter
30
Cisco IronPort AsyncOS 7.5 CLI Reference Guide
OL-23407-01
Example
Send the configuration to a mailbox to which you have access to confirm that the
system is able to send email on your network.
system is able to send email on your network.
resetconfig
Description
When physically transferring the appliance, you may want to start with factory
defaults. The r
defaults. The r
esetconfig
command resets all IronPort AsyncOS configuration
values to factory defaults. This command is extremely destructive, and it should
only be used when you are transferring the unit or as a last resort to solving
configuration issues. It is recommended you run the
only be used when you are transferring the unit or as a last resort to solving
configuration issues. It is recommended you run the
systemsetup
command after
reconnecting to the CLI after you have run the
resetconfig
command.
Note
The
resetconfig
command only works when the appliance is in the offline state.
When the
resetconfig
command completes, the appliance is automatically
returned to the online state, even before you run the
systemsetup
command again.
Table 3-16
mailconfig
mail3.example.com> mailconfig
Please enter the email address to which you want to send
the configuration file. Separate multiple addresses with commas.
[]> user@example.com
The configuration file has been sent to user@example.com.
mail3.example.com>