Cisco Cisco Email Security Appliance C160 Referencia técnica
9
Cisco IronPort AsyncOS 7.5 CLI Reference Guide
OL-23407-01
Chapter
Example: Enabling Incoming RelaysConfiguring an Incoming Relay
Table 3-4
incomingrelayconfig
mail3.example.com> incomingrelayconfig
Incoming relays: Disabled
Choose the operation you want to perform:
- SETUP - Edit update configuration.
- RELAYLIST - Configure incoming relays.
[]> setup
This command helps your IronPort appliance determine the sender's
originating IP address.
You should ONLY enable this command if your IronPort appliance is NOT
directly connected to the Internet as the "first hop" in your email
infrastructure.
You should configure this feature if other MTAs or servers are
configured at your network's perimeter to relay mail to your IronPort
appliance.
Do you want to enable and define incoming relays? [N]> y