Cisco Cisco Email Security Appliance C650 Referencia técnica
R E S E T C O N F I G
C H A P T E R 3 : T H E C O M M A N D S : R E F E R E N C E E X A M P L E S
37
Example
Send the configuration to a mailbox to which you have access to confirm that the system is
able to send email on your network.
able to send email on your network.
resetconfig
Description
When physically transferring the appliance, you may want to start with factory defaults. The
r
r
esetconfig
command resets all IronPort AsyncOS configuration values to factory defaults.
This command is extremely destructive, and it should only be used when you are transferring
the unit or as a last resort to solving configuration issues. It is recommended you run the
the unit or as a last resort to solving configuration issues. It is recommended you run the
systemsetup
command after reconnecting to the CLI after you have run the
resetconfig
command.
Note — The
resetconfig
command only works when the appliance is in the offline state.
When the
resetconfig
command completes, the appliance is automatically returned to the
online state, even before you run the
systemsetup
command again. If mail delivery was
suspended before you issued the
resetconfig
command, the mail will attempt to be
delivered again when the
resetconfig
command completes.
WARNING:
The
resetconfig
command will return all network settings to factory
defaults, potentially disconnecting you from the CLI, disabling services that you used to
connect to the appliance (FTP, Telnet, SSH, HTTP, HTTPS), and even removing additional user
accounts you created with the
connect to the appliance (FTP, Telnet, SSH, HTTP, HTTPS), and even removing additional user
accounts you created with the
userconfig
command. Do not use this command if you are
not able to reconnect to the CLI using the Serial interface or the default settings on the
Management port through the default Admin user account.
Management port through the default Admin user account.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to
the login host (i.e., the specific machine you are logged onto). This command requires access
to the local file system.
the login host (i.e., the specific machine you are logged onto). This command requires access
to the local file system.
Batch Command: This command does not support a batch format.
Code Example 3-16
mailconfig
mail3.example.com> mailconfig
Please enter the email address to which you want to send
the configuration file. Separate multiple addresses with commas.
[]> user@example.com
The configuration file has been sent to user@example.com.
mail3.example.com>