Cisco Cisco Email Security Appliance X1050 Referencia técnica
D I A G N O S T I C
C H A P T E R 3 : T H E C O M M A N D S : R E F E R E N C E E X A M P L E S
69
Using the
diagnostic
Command
The following commands are available within the
diagnostic
submenu:
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to
the login host (i.e., the specific machine you are logged onto). This command requires access
to the local file system.
the login host (i.e., the specific machine you are logged onto). This command requires access
to the local file system.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the diagnostic command can be used to check RAID status, clear caches
and show the contents of the ARP cache. To invoke as a batch command, use the following
formats:
and show the contents of the ARP cache. To invoke as a batch command, use the following
formats:
• Check the RAID status
• Clear the LDAP, DNS and ARP caches
• Display the ARP cache:
Table 3-2
diagnostic
Subcommands
Option
Sub commands
Availability
RAID
1. Run disk verify
Available on C30 and C60 only.
2. Monitor tasks in progress
3. Display disk verify verdict
NETWORK
FLUSH
C-, X-, and M-Series
ARPSHOW
SMTPPING
TCPDUMP
diagnostic raid
diagnostic network flush
diagnostic network arpshow