Cisco Cisco Email Security Appliance C160 Guía De Instalación

These simple-to-follow steps will allow you to 
install, confi gure, and start using your IronPort 
Email Security appliance right away. 

Before you start, be sure you have the following: 

• Rack cabinet enclosure

• Dell 9G Combination Rails - Rapid/Versa Combination Rails 

   and adaptor kits (optional)

• 10/100/Gigabit BaseT TCP/IP local area network (LAN) 

• Web browser software (or SSH and terminal software)

• Network cable(s) for connecting to your network

Check to make sure the following items are present in the IronPor t 

Email Security appliance system box:

• IronPort X1060 Email Security appliance

• Dual-head power cable 

 

• Straight power cables (2) 

• Null modem serial cable

• IronPor t X1060 Quickstar t Guide (this guide) 

• IronPor t AsyncOS Documentation CD

• IronPor t AsyncOS For Email User Guide

• IronPor t AsyncOS For Email Advanced User Guide

• Safety and Compliance Guide

• AsyncOS Release Notes

• Terms and Conditions of Use

IronPort X1060

Documentation 

CD

Quickstar t 

Guide

Release 

Notes

Safety and 

Compliance Guide

Advanced

User Guide

User 

Guide

PLAN THE INSTALLATION WITHIN YOUR NETWORK

Your IronPort appliance is designed to serve as your SMTP email 

gateway at your network perimeter — that is, the fi rst machine with 

an IP address that is directly accessible to the Internet for sending 

and receiving email. Many of the features (including Email Security 

Monitor, Reputation Filtering, Content Scanning, Spam Detection, 

and Virus Protection) require you to install the IronPor t appliance 

into your existing network infrastructure in the following way. 

Depending on your network confi guration, your fi rewall may need to 

be confi gured to allow access on the following por ts. 

SMTP and DNS ser vices must have access to the Internet. For other 

system functions, the following ser vices may be required:

 

• SMTP: por t 25    

 

• DNS: por t 53

• HTTP: por t 80   

 

• HTTPS: por t 443

• SSH: por t 22 

 

 

• Telnet: por t 23

• LDAP: por t 389 or 3268   

• NTP: por t 123   

• LDAP over SSL: por t 636

• LDAP with SSL for Global Catalog queries: por t 3269

• FTP: por t 21, data por t TCP 1024 and higher

See the appendix, “Firewall Information” in the AsyncOS For Email 

User Guide for more information. 

INSTALL IN RACK

Install the IronPor t appliance into your rack cabinet. Ensure the 

ambient temperature around the system is within the specifi ed 

limits. Ensure there is suffi cient airfl ow around the unit. 

DATA

The IronPor t appliance requires at least one IP address to send 

and receive email. Ideally, two IP addresses should be used:

• Connect the Data 1 network por t to your public network

• Connect the Data 2 network por t to your private network

Alternately, you can receive and deliver email from a single 

connection to either network por t, if your network topology dictates it. 

Multiple IP addresses can be confi gured on one network inter face.

Note: Some IronPor t X1060 appliances contain fi ber optic inter faces 

installed as the Data 3 and Data 4 network por ts. You can also use 

these fi ber optic inter faces if your network topology dictates it. 

SETUP AND MANAGEMENT

•  For access by Ethernet™, connect to the Management Network 

Port. Use a browser to access the web-based inter face on the 

default IP address 192.168.42.42. You can also access the 

command line inter face by SSH or terminal emulation software 

on the same IP address. (The netmask is /24.) 

•  Or, for Serial access, connect to the Serial Por t. Access the 

command line inter face by a terminal emulator using 9600 bits, 8 

bits, no parity, 1 stop bit (9600, 8, N, 1), fl ow control = Hardware. 

POWER

•  Plug the female end of each straight power cable into the 

redundant power supplies on the back panel of the appliance. 

•  Or, plug the female ends of the dual-headed power cable into the 

redundant power supplies on the back panel of the appliance. 

Turn on the system power by pressing the On/Off switch on the 

front panel of the the appliance. You must wait fi ve minutes for the 

system to initialize the ver y fi rst time you power up before moving 

to Step 5. 

Wait 5 

minutes

IronPor t 

Email Security

appliance

Clients

Firewall

Groupware Ser ver

(Microsoft Exchange™, Lotus 

Notes™, SunONE Messaging™)

Public 

Network

Private 

Network

Public and 

Private Networks

OR

Serial via Terminal 

(9600, 8, N, 1) 

Ethernet via SSH or HTTP

(on 192.168.42.42) 

OR

Dual-headed

Power Cable

Straight

Power 

Cables

OR

•  Fill out the Networking Worksheet on the back of this 

Quickstart Guide. Contact your network administrator if you 

need assistance. 

• Use a browser to connect to the following URL: 

http://192.168.42.42

• Log in as:   

Username: 

admin

   

 

Password: 

ironport

(Or, you may connect using SSH or terminal emulation software. Initiate 

a session to the IP address 192.168.42.42. Log in as admin with 

the password ironport and, at the prompt, run the systemsetup 

command.)  

Choose a new Password: *

Fully-Qualified Hostname of IronPort Messaging Gateway appliance: *

Data 1 Choose an Interface Name (e.g. ÒPrivateNetÓ):

*

IP A

ddress: *

Netmask: *

Broadcast A

ddress: *

Choose anInterface Name (e.g. ÒPublicNetÓ)

:

IP A

ddress:

Netmask:

Broadcast Address:

Default Router (gateway) I

P Address: *

Primary DNS Server Hostname:

Primary DNS Server I

P Address:

Secondary DNS Server Hostname:

Secondary DNS Server I

P Address:

Choose anInjector Name (e.g. ÒOutboundMailÓ): *

IP Interface Name (from above, e.g. ÒPrivateNetÓ):

*

NTP Server (I

P address or hostname)

:

Record critical 

information from the 

Networking Worksheet to 

assist in completing the 

System Setup Wizard. 

•  The System Setup Wizard begins and the end user license 

agreement is displayed. Please read and accept the license 

agreement to continue.

•  Use the information from the Networking Worksheet to complete 

the System Setup Wizard.