Cisco Cisco Email Security Appliance C650 Guía Del Usuario
33-51
Cisco AsyncOS 9.0 for Email User Guide
Chapter 33 System Administration
Changing Network Settings
Changing Network Settings
This section describes the features used to configure the network operation of the appliance. These
features give you direct access to the hostname, DNS, and routing settings that you configured via the
System Setup Wizard (or the
features give you direct access to the hostname, DNS, and routing settings that you configured via the
System Setup Wizard (or the
systemsetup
.
The following features are described:
•
sethostname
•
DNS Configuration (GUI and via the
dnsconfig
command)
•
Routing Configuration (GUI and via the
routeconfig
and
setgateway
commands
)
•
dnsflush
•
Password
•
Network Access
•
Login Banner
Changing the System Hostname
The hostname is used to identify the system at the CLI prompt. You must enter a fully-qualified
hostname. The s
hostname. The s
ethostname
command sets the name of the appliance. The new hostname does not take
effect until you issue the
commit
command.
CLUSTER.CC_ERROR_
NOIP.SSH_KEY
NOIP.SSH_KEY
Error connecting to cluster machine $name - $error -
$why$error:=Invalid host key
$why$error:=Invalid host key
’name’ - The hostname
and/or serial number of the
machine.
and/or serial number of the
machine.
’why’ - Detailed text about
the error.
the error.
Critical. Sent when the machine was unable to obtain
a valid IP address for another machine in the cluster
and was unable to obtain a valid SSH host key.
a valid IP address for another machine in the cluster
and was unable to obtain a valid SSH host key.
CLUSTER.CC_ERROR_
NOIP.TIMEOUT
NOIP.TIMEOUT
Error connecting to cluster machine $name - $error -
$why$error:=Operation timed out
$why$error:=Operation timed out
’name’ - The hostname
and/or serial number of the
machine.
and/or serial number of the
machine.
’why’ - Detailed text about
the error.
the error.
Warning. Sent when the machine was unable to
obtain a valid IP address for another machine in the
cluster and the specified operation timed out.
obtain a valid IP address for another machine in the
cluster and the specified operation timed out.
CLUSTER.SYNC.PUSH_ALERT
Overwriting $sections on machine $name
’name’ - The hostname
and/or serial number of the
machine.
and/or serial number of the
machine.
’sections’ - List of cluster
sections being sent.
sections being sent.
Critical. Sent when configuration data has gotten out
of sync and has been sent to a remote host.
of sync and has been sent to a remote host.
Table 33-10
Listing of Possible Clustering Alerts (continued)
Alert Name
Message and Description
Parameters