Cisco Cisco Email Security Appliance X1070 Guía Del Usuario
31-14
Cisco AsyncOS 8.5 for Email User Guide
Chapter 31 System Administration
Managing the Configuration File
Step 3
Within the CLI, use the
loadconfig
command to load the configuration file you placed in the directory
from Step 2, or paste the text (XML syntax) directly into the CLI.
In this example, a file named
changed.config.xml
is uploaded and the changes are committed:
In this example, a new configuration file is pasted directly at the command line. (Remember to type
Control-D on a blank line to end the paste command.) Then, the system setup wizard is used to change
the default hostname, IP address, and default gateway information. (For more information, see
Control-D on a blank line to end the paste command.) Then, the system setup wizard is used to change
the default hostname, IP address, and default gateway information. (For more information, see
.) Finally, the changes are committed.
mail3.example.com> loadconfig
1. Paste via CLI
2. Load from file
[1]> 2
Enter the name of the file to import:
[]> changed.config.xml
Values have been loaded.
Be sure to run "commit" to make these settings active.
mail3.example.com> commit
mail3.example.com> loadconfig
1. Paste via CLI
2. Load from file
[1]> 1
Paste the configuration file now. Press CTRL-D on a blank line when done.
[The configuration file is pasted until the end tag </config>. Control-D is entered on a
separate line.]