Cisco Cisco Email Security Appliance C650 Guía Del Usuario
13-15
Cisco AsyncOS 8.0.2 for Email User Guide
Chapter 13 Anti-Spam
Determining Sender IP Address In Deployments with Incoming Relays
Configuring the Appliance to Work with Incoming Relays
Enabling the Incoming Relays Feature
Note
You should only enable the incoming relays feature if a local MX/MTA relays mail to your Cisco
appliance.
appliance.
Procedure
Step 1
Select Network > Incoming Relays.
Step 2
Click Enable.
Step 3
Commit your changes.
Adding an Incoming Relay
Add incoming relays to identify:
•
Each machine on your network that will relay incoming messages to your Email Security appliance,
and
and
•
The header that will label the IP address of the original external sender.
Before You Begin
For information needed to complete these prerequisites, see
•
Determine whether you will use custom or received headers to identify the IP address of the original
external sender.
external sender.
•
If you will use custom headers:
–
Determine the exact header that will label the originating IP address of relayed messages.
–
For each MX, MTA, or other machine that connects to original external senders, set up that
machine to add the header name and the IP address of the original external sender to incoming
messages.
machine to add the header name and the IP address of the original external sender to incoming
messages.
Procedure
Step 1
Select Network > Incoming Relays.
Step 2
Click Add Relay.
Step 3
Enter a name for this relay.
Step 4
Enter the IP address of the MTA, MX, or other machine that connects to the Email Security appliance to
relay incoming messages.
relay incoming messages.
You can use IPv4 or IPv6 addresses, standard CIDR format, or an IP address range. For example, if you
have several MTAs at the edge of your network receiving email, you might want to enter a range of IP
addresses to include all of your MTAs, such as 10.2.3.1/8 or 10.2.3.1-10.
have several MTAs at the edge of your network receiving email, you might want to enter a range of IP
addresses to include all of your MTAs, such as 10.2.3.1/8 or 10.2.3.1-10.