Cisco Cisco Email Security Appliance X1070 Guía Del Usuario
29-51
Cisco AsyncOS 8.0.2 for Email User Guide
Chapter 29 System Administration
System Time
You can also verify the time zone files used by AsyncOS on the System Administration > Time
Settings page or using the
Settings page or using the
tzupdate
CLI command.
Selecting a Time Zone
The Time Zone page (available via the System Administration menu in the GUI) displays the time zone
for your Cisco appliance. You can select a specific time zone or GMT offset.
for your Cisco appliance. You can select a specific time zone or GMT offset.
Procedure
Step 1
Click Edit Settings on the System Administration > Time Zone page.
Step 2
Select a Region, country, and time zone from the pull-down menus.
Step 3
Submit and commit your changes.
Selecting a GMT Offset
Procedure
Step 1
Click Edit Settings on the System Administration > Time Zone page.
Step 2
Select GMT Offset from the list of regions.
Step 3
Select an offset in the Time Zone list. The offset refers to the amount of hours that must be
added/subtracted in order to reach GMT (the Prime Meridian). Hours preceded by a minus sign (“-”) are
east of the Prime Meridian. A plus sign (“+”) indicates west of the Prime Meridian.
added/subtracted in order to reach GMT (the Prime Meridian). Hours preceded by a minus sign (“-”) are
east of the Prime Meridian. A plus sign (“+”) indicates west of the Prime Meridian.
Step 4
Submit and commit your changes.
Editing Time Settings
You can edit the time settings for the Cisco appliance using one of the following methods:
•
Using the Networking Time Protocol (NTP)
•
Manually
Setting Appliance System Time Using the Network Time Protocol (NTP)
Procedure
Step 1
Navigate to the System Administration > Time Settings page.
Step 2
Click Edit Settings.
Step 3
In the Time Keeping Method section, select Use Network Time Protocol.
Step 4
Enter an NTP server address and click Add Row. You can add multiple NTP servers.