Cisco Cisco Email Security Appliance X1070 Guía Del Usuario
32-25
Cisco AsyncOS 8.5.5 for Email Security User Guide
Chapter 32 System Administration
Enabling Remote Power Management
When you are ready to install the upgrade, follow these instructions from the beginning, including
the prerequisites in the Before You Begin section, but choose the Install option.
the prerequisites in the Before You Begin section, but choose the Install option.
•
If you installed the upgrade:
–
Re-enable (resume) the listeners.
–
Save a configuration file for the new system. For information, see
.
•
After upgrade is complete, re-enable listeners.
Viewing Status of, Canceling, or Deleting a Background Download
Procedure
Step 1
Choose System Administration > System Upgrade.
Step 2
Click Upgrade Options.
Step 3
Choose an option:
Step 4
(Optional) View the Upgrade Logs.
Enabling Remote Power Management
The ability to remotely reset the power for the appliance chassis is available only on the following
hardware: C380 and C680.
hardware: C380 and C680.
If you want to be able to remotely reset appliance power, you must enable and configure this
functionality in advance, using the procedure described in this section.
functionality in advance, using the procedure described in this section.
Before You Begin
•
Cable the dedicated Remote Power Management port directly to a secure network. For information,
see the Hardware Installation Guide.
see the Hardware Installation Guide.
•
Ensure that the appliance is accessible remotely; for example, open any necessary ports through the
firewall.
firewall.
To Do
This
View download status
Look in the middle of the page.
If there is no download in progress and no completed download
waiting to be installed, you will not see download status information.
waiting to be installed, you will not see download status information.
Cancel a download
Click the Cancel Download button in the middle of the page.
This option appears only while a download is in progress.
Delete a downloaded installer
Click the Delete File button in the middle of the page.
This option appears only if an installer has been downloaded.