Cisco Cisco Email Security Appliance C650 Guía Del Usuario
29-4
Cisco AsyncOS 8.0.1 for Email User Guide
Chapter 29 System Administration
Management of the Cisco Appliance
Warning
The
resetconfig
command will return all network settings to factory defaults, potentially
disconnecting you from the CLI, disabling services that you used to connect to the appliance (FTP,
Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the
Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the
userconfig
command. Do not use this command if you are not able to reconnect to the CLI using the
Serial interface or the default settings on the Management port through the default Admin user
account.
account.
The resetconfig Command
Displaying the Version Information for AsyncOS
To determine which version of AsyncOS is currently installed on your Cisco appliance, use the System
Overview page from the Monitor menu in the GUI (see
Overview page from the Monitor menu in the GUI (see
), or use the
version
command in the CLI.
mail3.example.com> offline
Delay (seconds, minimum 30):
[30]> 45
Waiting for listeners to exit...
Receiving suspended.
Waiting for outgoing deliveries to finish...
Mail delivery suspended.
mail3.example.com> resetconfig
Are you sure you want to reset all configuration values? [N]> Y
All settings have been restored to the factory default.