Cisco Cisco Email Security Appliance C650 Guía Del Usuario
29-23
Cisco AsyncOS 8.0.1 for Email User Guide
Chapter 29 System Administration
Enabling Remote Power Management
Step 4
Submit and commit your changes.
Configuring Automatic Updates
Procedure
Step 1
Navigate to the Security Services > Service Updates page, and click Edit Update Settings.
Step 2
Select the check box to enable automatic updates.
Step 3
Enter an update interval (time to wait between checks for updates). Add a trailing
m
for minutes and
h
for hours. The maximum update interval is 1 hour.
Enabling Remote Power Management
The ability to remotely reset the power for the appliance chassis is available only on the following
hardware: C380 and C680.
hardware: C380 and C680.
If you want to be able to remotely reset appliance power, you must enable and configure this
functionality in advance, using the procedure described in this section.
functionality in advance, using the procedure described in this section.
Before You Begin
•
Cable the dedicated Remote Power Management port directly to a secure network. For information,
see the Hardware Installation Guide.
see the Hardware Installation Guide.
•
Ensure that the appliance is accessible remotely; for example, open any necessary ports through the
firewall.
firewall.
•
This feature requires a unique IPv4 address for the dedicated Remote Power Management interface.
This interface is configurable only via the procedure described in this section; it cannot be
configured using the
This interface is configurable only via the procedure described in this section; it cannot be
configured using the
ipconfig
command.
•
In order to cycle appliance power, you will need a third-party tool that can manage devices that
support the Intelligent Platform Management Interface (IPMI) version 2.0. Ensure that you are
prepared to use such a tool.
support the Intelligent Platform Management Interface (IPMI) version 2.0. Ensure that you are
prepared to use such a tool.
•
For more information about accessing the command-line interface, see the CLI reference guide.
Procedure
Step 1
Use SSH, telnet, or the serial console port to access the command-line interface.
Step 2
Sign in using an account with Administrator access.
Step 3
Enter the following commands:
remotepower
HTTPS Proxy Server
An optional proxy server using HTTPS. If you define the HTTPS proxy
server, it will be used to update the services listed in the GUI.
server, it will be used to update the services listed in the GUI.
Setting
Description