Cisco Cisco Email Security Appliance X1050 Guía Del Usuario
Chapter 15 System Administration
15-58
Cisco IronPort AsyncOS 7.5 for Email Configuration Guide
OL-25136-01
Changing Network Settings
This section describes the features used to configure the network operation of the
Cisco IronPort appliance. These features give you direct access to the hostname,
DNS, and routing settings that you configured via the System Setup Wizard (or
the
Cisco IronPort appliance. These features give you direct access to the hostname,
DNS, and routing settings that you configured via the System Setup Wizard (or
the
systemsetup
command) in
.
The following features are described:
•
sethostname
•
DNS Configuration (GUI and via the
dnsconfig
command)
•
Routing Configuration (GUI and via the
routeconfig
and
setgateway
commands
)
•
dnsflush
•
Password
•
Network Access
•
Login Banner
Changing the System Hostname
The hostname is used to identify the system at the CLI prompt. You must enter a
fully-qualified hostname. The s
fully-qualified hostname. The s
ethostname
command sets the name of the Cisco
IronPort appliance. The new hostname does not take effect until you issue the
commit
command.