Cisco Cisco Email Security Appliance C170 Guía Del Usuario
Appendix B Accessing the Appliance
B-526
Cisco IronPort AsyncOS 7.3 for Email Advanced Configuration Guide
OL-23081-01
FTP Access
To access the appliance via FTP, follow these steps:
Step 1
Use the Network > IP Interfaces page or the
interfaceconfig
command to enable
FTP access for the interface.
WARNING: By disabling services via the
interfaceconfig
command,
you have the potential to disconnect yourself from the CLI, depending on
how you are connected to the appliance. Do not disable services with this
command if you are not able to reconnect to the appliance using another
protocol, the Serial interface, or the default settings on the Management
port.
how you are connected to the appliance. Do not disable services with this
command if you are not able to reconnect to the appliance using another
protocol, the Serial interface, or the default settings on the Management
port.
In this example, the Management interface is edited to enable FTP access on
port 21 (the default port):
port 21 (the default port):
Figure B-1
Edit IP Interface Page
Note
Remember to
commit
your changes before moving on to the next step.