Cisco Cisco Email Security Appliance C650 Guía Del Usuario
33-26
User Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 33 System Administration
Enabling Remote Power Management
Step 4
(Optional) View the Upgrade Logs.
Enabling Remote Power Management
The ability to remotely reset the power for the appliance chassis is available only on the following
hardware: C380 and C680.
hardware: C380 and C680.
If you want to be able to remotely reset appliance power, you must enable and configure this
functionality in advance, using the procedure described in this section.
functionality in advance, using the procedure described in this section.
Before You Begin
•
Cable the dedicated Remote Power Management port directly to a secure network. For information,
see the Hardware Installation Guide.
see the Hardware Installation Guide.
•
Ensure that the appliance is accessible remotely; for example, open any necessary ports through the
firewall.
firewall.
•
This feature requires a unique IPv4 address for the dedicated Remote Power Management interface.
This interface is configurable only via the procedure described in this section; it cannot be
configured using the
This interface is configurable only via the procedure described in this section; it cannot be
configured using the
ipconfig
command.
•
In order to cycle appliance power, you will need a third-party tool that can manage devices that
support the Intelligent Platform Management Interface (IPMI) version 2.0. Ensure that you are
prepared to use such a tool.
support the Intelligent Platform Management Interface (IPMI) version 2.0. Ensure that you are
prepared to use such a tool.
•
For more information about accessing the command-line interface, see the CLI reference guide.
Procedure
Step 1
Use SSH or the serial console port to access the command-line interface.
Step 2
Sign in using an account with Administrator access.
Step 3
Enter the following commands:
remotepower
setup
Step 4
Follow the prompts to specify the following:
•
The dedicated IP address for this feature, plus netmask and gateway.
To Do
This
View download status
Look in the middle of the page.
If there is no download in progress and no completed download
waiting to be installed, you will not see download status information.
waiting to be installed, you will not see download status information.
Cancel a download
Click the Cancel Download button in the middle of the page.
This option appears only while a download is in progress.
Delete a downloaded installer
Click the Delete File button in the middle of the page.
This option appears only if an installer has been downloaded.