Cisco Cisco Email Security Appliance X1050 Guía Del Usuario
13-22
User Guide for AsyncOS 10.0 for Cisco Email Security Appliances
Chapter 13 Anti-Spam
Determining Sender IP Address In Deployments with Incoming Relays
Step 4
Enter the IP address of the MTA, MX, or other machine that connects to the Email Security appliance to
relay incoming messages.
relay incoming messages.
You can use IPv4 or IPv6 addresses, standard CIDR format, or an IP address range. For example, if you
have several MTAs at the edge of your network receiving email, you might want to enter a range of IP
addresses to include all of your MTAs, such as 10.2.3.1/8 or 10.2.3.1-10.
have several MTAs at the edge of your network receiving email, you might want to enter a range of IP
addresses to include all of your MTAs, such as 10.2.3.1/8 or 10.2.3.1-10.
For IPv6 addresses, AsyncOS supports the following formats:
•
2620:101:2004:4202::0-2620:101:2004:4202::ff
•
2620:101:2004:4202::
•
2620:101:2004:4202::23
•
2620:101:2004:4202::/64
Step 5
Specify the header that will identify the IP address of the original external sender.
When entering a header, you do not need to enter the trailing colon.
a.
Select the header type:
Choose custom headers (recommended) or Received headers.
b.
For custom headers:
Enter the header name that you configured the relaying machine to add to relayed messages.
For example:
SenderIP
or
X-CustomHeader
c.
For Received headers:
Enter the character or string after which the IP address will appear. Enter the number for the “hop”
to check for the IP address.
to check for the IP address.
Step 6
Submit and commit your changes.
What To Do Next
Consider doing the following:
•
Add the relaying machine to a sender group with a mail flow policy that has unlimited messages for
DHAP. For an explanation, see
DHAP. For an explanation, see
•
To facilitate tracking and troubleshooting, configure the appliance logs to show which header is
used. See
used. See
Related Topics
•
Message Headers for Relayed Messages
You will configure your appliance to use one of the following types of header to identify the original
sender of a relayed message:
sender of a relayed message:
•