Cisco Cisco Email Security Appliance C170 Prospecto
3-77
AsyncOS 9.6 for Cisco Email Security Appliances CLI 참조 가이드
3 장 명령: 참조 예제
일반 관리 및 문제 해결
예: 다른 메일 서버와의 연결 확인
다음 예에서는 diagnostics를 사용하여 다른 메일 서버와의 연결을 확인합니다. 메시지를 보내거나
서버를 ping하여 메일 서버를 테스트할 수 있습니다.
서버를 ping하여 메일 서버를 테스트할 수 있습니다.
mail.example.com> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> network
Choose the operation you want to perform:
- FLUSH - Flush all network related caches.
- ARPSHOW - Show system ARP cache.
- NDPSHOW - Show system NDP cache.
- SMTPPING - Test a remote SMTP server.
- TCPDUMP - Dump ethernet packets.
[]> smtpping
Enter the hostname or IP address of the SMTP server:
[mail.example.com]> mail.com
The domain you entered has MX records.
Would you like to select an MX host to test instead? [Y]> y
Select an MX host to test.
1. mx00.gmx.com
2. mx01.gmx.com
[1]>
Select a network interface to use for the test.
1. Management
2. auto
[2]> 1
Do you want to type in a test message to send? If not, the connection will be tested but
no email will be sent. [N]>
Starting SMTP test of host mx00.gmx.com.
Resolved 'mx00.gmx.com' to 74.208.5.4.
Unable to connect to 74.208.5.4.
예: 초기 제조업체 값으로 어플라이언스 컨피그레이션 재설정
다음 예에서는 어플라이언스 컨피그레이션을 초기 제조업체 값으로 재설정하는 방법을 보여줍니다.
mail.example.com> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> reload