Cisco Cisco Email Security Appliance X1050 Prospecto
3-22
AsyncOS 9.6 for Cisco Email Security Appliances CLI 참조 가이드
3 장 명령: 참조 예제
컨피그레이션 파일 관리
loadconfig
설명
컨피그레이션 파일을 로드합니다.
참고
클러스터링된 시스템에 컨피그레이션을 로드하는 것은 GUI를 사용할 때만 지원됩니다. 자세한 내
용은 AsyncOS for Cisco Email Security Appliances 사용 설명서를 참조하십시오.
용은 AsyncOS for Cisco Email Security Appliances 사용 설명서를 참조하십시오.
사용
Commit: 이 명령은 'commit' 이 필요합니다.
클러스터 관리: 이 명령은 3가지 시스템 모드(클러스터, 그룹, 시스템) 모두에서 사용할 수 있습니다.
배치 명령: 이 명령은 배치 형식을 지원하지 않습니다.
예
이 예에서는 로컬 위치에서 새로운 컨피그레이션 파일을 가져옵니다.
mail3.example.com> loadconfig
1. Paste via CLI
2. Load from file
[1]> 2
Enter the name of the file to import:
[]> changed.config.xml
Values have been loaded.
Be sure to run "commit" to make these settings active.
mail3.example.com> commit
Please enter some comments describing your changes:
[]> loaded new configuration file
Do you want to save the current configuration for rollback? [Y]> n
Changes committed: Fri May 23 11:42:12 2014 GMT
이 예에서는 새로운 컨피그레이션 파일을 명령줄에서 곧바로 붙여넣기합니다. 빈 줄에 Control-D
를 입력해야 붙여넣기 명령이 종료합니다. 그런 다음 시스템 설정 마법사를 사용하여 기본 호스트
이름, IP 주소, 기본 게이트웨이 정보를 변경합니다. 마지막으로, 변경 사항이 커밋됩니다.
를 입력해야 붙여넣기 명령이 종료합니다. 그런 다음 시스템 설정 마법사를 사용하여 기본 호스트
이름, IP 주소, 기본 게이트웨이 정보를 변경합니다. 마지막으로, 변경 사항이 커밋됩니다.
mail3.example.com> loadconfig
1. Paste via CLI
2. Load from file
[1]> 1
Paste the configuration file now.
Press CTRL-D on a blank line when done.
[The configuration file is pasted until the end tag </config>. Control-D is entered on a
separate line.]
Values have been loaded.
Be sure to run "commit" to make these settings active.