Cisco Cisco Aironet 340 Ethernet Bridges Guía Del Usuario
3 - 2 Aironet 340 Series Bridge
Viewing the Configuration Menu
Once you have completed the installation, the next step is to use the
Configuration Menu commands to configure the Aironet 340 Series
Bridge.
Configuration Menu commands to configure the Aironet 340 Series
Bridge.
To access the Configuration Menu, select Configuration from the Main
Menu.
Menu.
Menu Descriptions
Radio
:
Used to set radio network parameters, such as system ID,
frequency, and bitrate. See Chapter 4 “Configuring the Radio
Network”.
Network”.
Ethernet: Used to set the Ethernet Parameters. See Chapter 5 “Config-
uring the Ethernet Port”.
uring the Ethernet Port”.
Ident: Used to set various infrastructure identifiers such as Node
Names, Network ID, and Internet Address. See Chapter 6 “Setting the
Network Identifiers”.
Names, Network ID, and Internet Address. See Chapter 6 “Setting the
Network Identifiers”.
Console
:
Used to set up the Console Port. See Chapter 2 “Accessing the
Console System”.
STP: Used to configure the spanning tree protocol. See Chapter 8
“Using the Spanning Tree Protocol”.
“Using the Spanning Tree Protocol”.
Mobile-IP: Used to configure the unit as either a home or foreign
mobile P agent. See Chapter 7 “Configuring Mobile IP”.
mobile P agent. See Chapter 7 “Configuring Mobile IP”.
Configuration Menu
Option Value Description
1 - Radio [ menu ] - Radio network parameters
2 - Ethernet [ menu ] - Ethernet configuration
3 - Ident [ menu ] - Identification information
4 - Console [ menu ] - Control console access
5 - Stp [ menu ] - Spanning Tree Protocol
6 - Mobile-IP [ menu ] - Mobile IP Protocol Configuration
7 - Time [ menu ] - Network Time Setup
8 - Dump - Dump configuration to console
Enter an option number or name, “=” main menu, <ESC> previous menu
>_