Cisco Cisco Aironet 1240 AG Access Point Datos agregados
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 2 of 3
CISCO IOS SOFTWARE RELEASE 12.3(7)JX NEW FEATURE
LWAPP Upgrade And Recovery Support
This feature allows a Cisco autonomous access point to communicate with a Cisco Wireless LAN Controller in order to receive a full Lightweight
Access Point Protocol (LWAPP) image. Access points shipping with LWAPP or selected autonomous access points upgraded from autonomous to
lightweight mode use the LWAPP upgrade and recovery support feature to receive their full LWAPP image from the controller. The LWAPP
upgrade and recovery support feature is also used as a recovery image if the full LWAPP image becomes corrupted. Access points using the LWAPP
upgrade and recovery support feature have limited functionality and their radios are disabled until the Cisco Wireless LAN Controller sends them the
full LWAPP image.
Special Notes
The following are special notes about Cisco IOS Software release 12.3(7)JX upgrade and recovery software image:
•
Only use this image when upgrading a Cisco Aironet autonomous access point to operate as a lightweight access point using LWAPP and
communicating with a Cisco Wireless LAN Controller.
•
Use the “Autonomous To Lightweight Mode” upgrade tool to load this image onto Cisco Aironet autonomous access points currently running
Cisco IOS Software version 12.3(7)JA or later.
•
This release only contains a partial LWAPP image. The full LWAPP software image must be downloaded from the Cisco Wireless LAN
Controller to the access point after it has been converted in order for it to operate as a Cisco Aironet lightweight access point. A connection
between the access point and Cisco Wireless LAN Controller is required to download the full LWAPP image.
between the access point and Cisco Wireless LAN Controller is required to download the full LWAPP image.
•
This image is also shipping with orderable Cisco Aironet lightweight access points.
Release Notes
For more information about the platforms and features delivered in Cisco IOS Software Release 12.3(7)JX, release notes are available at:
http://www.cisco.com/en/US/products/hw/wireless/index.html
Support
Cisco IOS Software Release 12.3(7)JX follows the standard Cisco support policy. For more information, visit:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html
PRODUCT FEATURES AND MODEL NUMBERS
Cisco IOS Software Release 12.3(7)JX feature sets, images, and memory recommendations are listed in Table 2.
Table 2.
Cisco IOS Software Release 12.3(7)JX Feature Sets, Images, and Memory Recommendations
Platform
Software Feature Set
Product Code
Image
Flash
DRAM
Cisco Aironet 1130AG
Series Access Point
Series Access Point
Wireless LAN
S113RK9W-12307JX
c1130-rcvk9w8-tar.123-7.JX.tar
16 MB
32 MB
Cisco Aironet 1200
Series Access Point**
Series Access Point**
Wireless LAN
S12RK9W-12307JX
c1200-rcvk9w8-tar.123-7.JX.tar
8 MB
16 MB
Cisco Aironet 1230AG
Series Access Point
Series Access Point
Wireless LAN
S12RK9W-12307JX
c1200-rcvk9w8-tar.123-7.JX.tar
8 MB
16 MB
The products supported by this release are listed in Table 3.