Cisco Cisco Aironet 1130 AG Access Point Guía De Información
Q&A
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 4
A.
At present, the Cisco Aironet 1130AG Series supports the 12 channels in the UNII 1, 2, and 3
bands within the 5 GHz spectrum. For operations in the 5.47 to 5.725 GHz band, the FCC
requires that equipment implement a radar detection function, the particulars of which are
currently not defined by the FCC.
The Cisco Aironet 1130AG Series does support the 802.11h standard, which allows for
operation across the 5 GHz band within the ETSI regulatory domain. When the FCC finalizes
its radar detection requirements (expected in the second half of 2005), Cisco will support
these regulatory requirements and provide an expanded 5 GHz channel set for this regulatory
domain following the standard FCC approval process.
operation across the 5 GHz band within the ETSI regulatory domain. When the FCC finalizes
its radar detection requirements (expected in the second half of 2005), Cisco will support
these regulatory requirements and provide an expanded 5 GHz channel set for this regulatory
domain following the standard FCC approval process.
Q.
Can I operate the Cisco Aironet 1130AG Series Access Point in Europe?
A.
Yes, the Cisco Aironet 1130AG Series is operable in Europe. The Cisco Aironet 1130AG
Series Access Point is dual-band; it operates in the 2.4 and 5-GHz bands. According to the
ECC Decision ECC/DEC(04)08, WLAN devices operating in the 5 GHz band must implement
the Dynamic Frequency Selection (DFS) requirement, which includes radar detection.
The Cisco Aironet 1130AG Series is fully compliant with ECC/DEC(04)08 and EN 301 893.
For country-specific information on frequency and power applicable under the interim
regulations, see the compliance document that ships with the product.
regulations, see the compliance document that ships with the product.
Printed in USA
C67-332364-01 4/07