Cisco Cisco Aironet 1130 AG Access Point Guía De Instalación
15
Quick Start Guide Cisco Aironet 1130AG Access Point
Caution
Do not use plastic wall anchors or the keyhole slots on the
mounting bracket for ceiling installations. When mounting the
access point on a hard ceiling, use four fasteners capable of
maintaining a minimum pullout force of 20 lbs (9 kg).
mounting bracket for ceiling installations. When mounting the
access point on a hard ceiling, use four fasteners capable of
maintaining a minimum pullout force of 20 lbs (9 kg).
Connecting Power
Connect the 1130AG series access point to a power source. The access point
can be powered locally by using an AC power module or over the Ethernet
using power sourcing equipment (PSE). Regardless of the method you use,
the power source must be compliant with the IEC60950 standard for a limited
power source. IEC60950 devices include:
can be powered locally by using an AC power module or over the Ethernet
using power sourcing equipment (PSE). Regardless of the method you use,
the power source must be compliant with the IEC60950 standard for a limited
power source. IEC60950 devices include:
•
An AC power module connected to the access point’s power connector
•
The following devices that provide Power-over-Ethernet (PoE):
– An IEEE 802.3af compliant power source
– A compliant Cisco inline power switch
– A Cisco power injector with a compliant AC power module