Cisco Cisco Aironet 1130 AG Access Point Guía De Instalación

By default, the access point uses Cisco Aironet 802.11 extensions to 
detect the capabilities of Cisco Aironet client devices and to support 
features that require specific interaction between the access point and 
associated client devices. Aironet extensions must be enabled to support 
features such as load balancing, Message Integrity Check (MIC), 
Temporal Key Integrity Check (TKIP), Repeater Mode, and World 
Mode.

Disabling Aironet Extensions disables the features mentioned above, but 
it sometimes improves the ability of non-Cisco client devices to 
associate to the access point.

After you assign basic settings to your access point, you must configure 
security settings to prevent unauthorized access to your network. Because it 
is a radio device, the access point can communicate beyond the physical 
boundaries of your work site. 

Just as you use the Express Setup page to assign basic settings, you can use 
the Express Security page to create unique SSIDs and assign one of four 
security types to them. This illustration shows the Express Security page.