Cisco Cisco Aironet 1200 Access Point Notas de publicación

Descargar
Página de 10
8
Release Notes for 1100 and 1200 Series Access Points for Cisco IOS Release 12.2(11)JA
OL-3951-01
Caveats
Caveats
This section lists open and resolved caveats in Cisco IOS Release 12.2(11)JA.
Open Caveats
These caveats are open in Cisco IOS Release 12.2(11)JA:
CSCea88706—You cannot modify existing MAC address and Ethertype filters on the access point 
web-browser interface. 
Workaround: Instead of modifying the filter, delete the filter and recreate it using the web-browser 
interface.
CSCea88862—You cannot run a link test using thousands of packets on the web-browser interface. 
Workaround: When running link tests on the web-browser interface, limit the test to hundreds of 
packets, or use the CLI to run link tests using thousands of packets.
CSCea89985—When you configure hot standby mode using a broadcast MAC address to specify 
the access point to be monitored, the access point generates a traceback. 
Workaround: Do not use a broadcast MAC address when configuring hot standby.
CSCea91378—When you run a carrier busy test on the web-browser interface when the access point 
radio is disabled, the web-browser interface reports that the test failed. 
Workaround: Enable the radio interface before running the carrier busy test on the web-browser 
interface, or run the carrier busy test on the CLI.
CSCea91424—When a CCKM client device roams to a foreign network using proxy Mobile IP, 
these error messages sometimes appear even though the client associates successfully:
Apr 30 20:36:34.521: %DOT11-7-AUTH_FAILED: Station 000b.fd75.4180 Authentication 
failed
Apr 30 20:36:37.712: %DOT11-6-ASSOC: Interface Dot11Radio0, Station STL-CLIENT-3 
000b.fd75.4180 Associated KEY_MGMT[CCKM]
You can ignore these messages.
CSCeb06139—When several mobile clients are using Cisco Centralized Key Management 
(CCKM), the access point sometimes reboots when you enter the show wlccp wds mn detail 
command and the command displays the mobile node details at the same time that a mobile node 
expires and is deleted. 
Workaround: Before entering the show wlccp wds mn detail command, enter terminal length 0 in 
privileged EXEC mode to display the show wlccp wds mn detail command output without breaking 
it into multiple pages.
CSCin44512—If 8 or more VLANs are configured on your access point, you cannot apply filters 
using the Apply Filters page in the web-browser interface. 
Workaround: Use the CLI to apply filters when 8 or more VLANs are enabled.
CSCin44591—When you use the web-browser interface to enable PSPF on a non-native VLAN, 
PSPF does not work. 
Workaround: Use the CLI to enable PSPF on a non-native VLAN.