Cisco Cisco Aironet 1200 Access Point Notas de publicación
11
Troubleshooting
OL-3159-01
Troubleshooting
•
CSCdx67300, CSCdu13008, and CSCdy23465—The access point no longer disables DNS lookups
after two failures; it now temporarily disables DNS lookups for 5 minutes and then re-enables DNS
lookups. After 5 minutes, the next DNS request re-enables DNS lookups, and the access point logs
this event to notify the user that DNS is reenabled.
after two failures; it now temporarily disables DNS lookups for 5 minutes and then re-enables DNS
lookups. After 5 minutes, the next DNS request re-enables DNS lookups, and the access point logs
this event to notify the user that DNS is reenabled.
•
CSCdx83033 and CSCdx35390—The access point now successfully loads the configuration file via
FTP.
FTP.
•
CSCdw83249—When you click the MAC address of an access point listed in the Association Table
to display the Station page for that access point, the Station page now displays the correct uptime
for the access point.
to display the Station page for that access point, the Station page now displays the correct uptime
for the access point.
•
CSCdx93214—Broadcast key rotation now works on second-level repeater acess points. For
example, in a repeater chain consisting of a root access point, a repeater access point associated to
the root, and a second repeater associated to the first repeater, the second repeater now can pass data
when brodacast key rotation is enabled.
example, in a repeater chain consisting of a root access point, a repeater access point associated to
the root, and a second repeater associated to the first repeater, the second repeater now can pass data
when brodacast key rotation is enabled.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
. Select Wireless Technologies under Top Issues.
Documentation Updates
This section describes errors, changes, and omissions for the access point user documentation.
Errors
The screen shot on page 18 in the Quick Start Guide: Cisco Aironet 1200 Series Access Points mistakenly
shows that the Ensure Compatibility With 2Mb/sec Clients or non-Aironet 802.11 setting is available for
the 5-GHz radio module on the Express Setup page. However, this setting is available only for the
2.4-GHz internal radio and is not available for the 5-GHz radio module.
shows that the Ensure Compatibility With 2Mb/sec Clients or non-Aironet 802.11 setting is available for
the 5-GHz radio module on the Express Setup page. However, this setting is available only for the
2.4-GHz internal radio and is not available for the 5-GHz radio module.
shows a corrected
screen shot of the Express Setup page.