Cisco Cisco Aironet 1000 Series Lightweight Access Point Guía De Instalación
2
1
About this Guide
This guide is designed to help you install and minimally configure your Cisco Aironet 1000 Series
Lightweight Access Point in a wireless Local Area Network (LAN). This guide covers both the internal
and external models of the access point.
Lightweight Access Point in a wireless Local Area Network (LAN). This guide covers both the internal
and external models of the access point.
For additional installation, mounting, and configuration information for the access point, see the
following documents:
following documents:
•
Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide
•
Cisco Wireless LAN Controller Configuration Guide
These and other documents are available on Cisco.com. Follow these steps to access these documents:
Step 1
Browse to http://www.cisco.com
Step 2
Click Technical Support and Documentation.
Step 3
Click Wireless. The Wireless Support Resources page appears.
Step 4
Choose the appropriate link for the documents you want to view or download.
2
Safety Information
Follow the guidelines in this section to ensure proper operation and safe use of the access point.
FCC Safety Compliance Statement
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with approved
Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in
OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the instructions found in
this manual will result in user exposure that is substantially below the FCC recommended limits.
frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with approved
Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in
OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the instructions found in
this manual will result in user exposure that is substantially below the FCC recommended limits.
Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE
Directive)
Directive)
This declaration is only valid for configurations (combinations of software, firmware and hardware)
provided and/or supported by Cisco Systems. The use software or firmware not supported/provided
by Cisco Systems may result that the equipment is no longer compliant with the regulatory
requirements.
provided and/or supported by Cisco Systems. The use software or firmware not supported/provided
by Cisco Systems may result that the equipment is no longer compliant with the regulatory
requirements.