Cisco Cisco Aironet 1200 Access Point Notas de publicación
13
Release Notes for Cisco Aironet 1200 Series Access Points Running VxWorks Firmware Version 12.04
OL-5158-01
Caveats
•
CSCea51324—Enabling MIC on a 350 series bridge no longer blocks communication.
•
CSCea65900—TFTP downloads no longer cause the access point to crash.
•
CSCeb27772—The access point no longer crashes due to excess memory consumed by maintaining
the association table.
the association table.
•
CSCeb55765—The auto channel-select feature now works as expected.
•
CSCeb58467—A long If-Modified-Since header no longer causes a Buffer overflow in Trivial
HTTP (THTTPd).
HTTP (THTTPd).
•
CSCeb61648—The access point now sends accounting request packets when a client attempts a
double LEAP login.
double LEAP login.
•
CSCeb61728, CSCeb87616, CSCec00332, CSCeb73542—The access point no longer hangs when
too many client devices associate to it.
too many client devices associate to it.
•
CSCeb75140—The access point no longer stops sending beacons unexpectedly.
•
CSCeb76379—When a client that has been assigned to a VLAN disassociates and then reassociates
to the access point, the client no longer has to wait to be reassigned to the correct VLAN.
to the access point, the client no longer has to wait to be reassigned to the correct VLAN.
•
CSCeb82272—Client devices using EAP-SIM can now log off from a connection to an access point
and successfully log back in.
and successfully log back in.
•
CSCeb84020—Bridge links are now stable when the non-root bridge is configured to authenticate
to the root bridge using LEAP authentication.
to the root bridge using LEAP authentication.
•
CSCeb85983—Non-root bridges no longer hang when they lose association with the root bridge.
•
CSCec20567—Non-root bridges now reassociate after losing connectivity to the root bridge.
•
CSCec53509—You can now define client MAC addresses that are not allowed to associate to the
access point.
access point.
•
CSCin46604—The Solicitations Sent counter on the authoritative access point now increments
correctly by 1.
correctly by 1.
•
CSCin46620—Resetting All System Factory Defaults now deletes existing VLAN numbers.
•
CSCin46639—When configured to do so, the access point now switches to repeater mode when
Ethernet link is down.
Ethernet link is down.
Other Caveats
The following is a status of caveats published in the release notes for previous VxWorks versions that
were not resolved in version 12.04:
were not resolved in version 12.04:
•
CSCeb79415—The access point association table does not display a client name, device type, or
software version for Cisco 7920 phones that associate to the access point.
software version for Cisco 7920 phones that associate to the access point.
This caveat has been closed because Cisco 7920 phones do not support Aironet Extensions. The
access point displays values for the client name, device, type, and software version fields in the
association table only for client devices that support Aironet Extensions.
access point displays values for the client name, device, type, and software version fields in the
association table only for client devices that support Aironet Extensions.
•
CSCin45850—A valid access point is not reporting a rogue access point in its logs when an invalid
RADIUS server IP address is used in the rogue AP.
RADIUS server IP address is used in the rogue AP.
This caveat has been closed.
•
CSCin46049—Client is always forced to EAP-associate with multiple VLANs.
Cisco has been unable to reproduce this caveat.