Cisco Cisco Aironet 1200 Access Point Notas de publicación

Descargar
Página de 17
4
Release Notes for Cisco Aironet 1200 Series Access Points Running VxWorks Firmware Version 12.04
OL-5158-01
  Installation Notes
Figure 1
Improper Power Configuration Using Two Power Sources
Operating 5-GHz Radio Requires Power Injector or Power Module
Only the 1200 series power injector and the 1200 series power module can support operation of the 
5-GHz radio in the access point. Currently, switches with inline power and power patch panels do not 
provide enough power for operation of the 5-GHz radio.
Access Point Requires 1200 Series Universal Power Supply and Power Injector
You must use a 1200 series universal power supply to power the access point. If you need to use a power 
injector to inject power into the access point’s Ethernet port, you must use a 1200 series power injector. 
The 350 series universal power supply and power injector are not compatible with the 1200 series access 
point.
System Requirements
You must have a 1200 series access point to install firmware VxWorks version 12.04.
Version Supported
Your access point must be running VxWorks firmware version 11.40T or later to install VxWorks 
firmware version 12.04.
Upgrading to a New Firmware Release
Finding the Firmware Version
The firmware version number is in the upper-left corner of most management screens in the web-browser 
interface and at the top of the home (Summary Status) page in the command-line interface.
Universal
power supply
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
23
24
10Base-T / 10
0Base-TX
100Base-FX
Catalyst 2950
 SERIES
Switch with
inline power or
power patch panel
Access point
74329