Cisco Cisco Aironet 1250 Series Access Point Guía De Instalación

– Provide your organization’s network administrator with your access 

point MAC address. Your network administrator will query the 
DHCP server using the MAC address to identify the IP address. The 
MAC address is on a label attached to the bottom of the access 
point.

– Use the CLI and serial port to identify the assigned IP address.

If you need to configure the access point locally (without connecting it to a 
wired LAN), you can connect a PC to its console port by using a DB-9 to 
RJ-45 serial cable.

Follow these steps to open the CLI by connecting to the access point console 
port.

Connect a nine-pin, female DB-9 to RJ-45 serial cable to the RJ-45 
console port on the access point and to the COM port on the PC.

Set up a terminal emulator on your PC to communicate with the 
access point. Use the following settings for the terminal emulator 
connection: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow 
control.