Cisco Cisco Aironet 1200 Access Point Notas de publicación
8
Release Notes for Cisco Aironet 1100 and 1200 Series Access Points for Cisco IOS Release 12.2(11)JA1
OL-4663-01
Troubleshooting
Apr 30 20:36:34.521: %DOT11-7-AUTH_FAILED: Station 000b.fd75.4180 Authentication
failed
Apr 30 20:36:37.712: %DOT11-6-ASSOC: Interface Dot11Radio0, Station STL-CLIENT-3
000b.fd75.4180 Associated KEY_MGMT[CCKM]
You can ignore these messages.
•
CSCeb06139—When several mobile clients are using Cisco Centralized Key Management
(CCKM), the access point sometimes reboots when you enter the show wlccp wds mn detail
command and the command displays the mobile node details at the same time that a mobile node
expires and is deleted.
(CCKM), the access point sometimes reboots when you enter the show wlccp wds mn detail
command and the command displays the mobile node details at the same time that a mobile node
expires and is deleted.
Workaround: Before entering the show wlccp wds mn detail command, enter terminal length 0 in
privileged EXEC mode to display the show wlccp wds mn detail command output without breaking
it into multiple pages.
privileged EXEC mode to display the show wlccp wds mn detail command output without breaking
it into multiple pages.
•
CSCin44512—If 8 or more VLANs are configured on your access point, you cannot apply filters
using the Apply Filters page in the web-browser interface.
using the Apply Filters page in the web-browser interface.
Workaround: Use the CLI to apply filters when 8 or more VLANs are enabled.
•
CSCin44591—When you use the web-browser interface to enable PSPF on a non-native VLAN,
PSPF does not work.
PSPF does not work.
Workaround: Use the CLI to enable PSPF on a non-native VLAN.
Resolved Caveats
These caveats are resolved in Cisco IOS Release 12.2(11)JA1:
•
CSCea02355—Rare ip packets no longer cause an input queue wedge.
•
CSCdz29724—It is no longer possible to enumerate existing accounts on an 1100 or 1200 series
access point.
access point.
•
CSCeb49869—Sending a malformed URL to an 1100 or 1200 series access point no longer causes
the device to reset.
the device to reset.
•
CSCin46150—User-based VLAN assignments now work properly. For example, when a RADIUS
server is configured to allow a different VLAN (such as 10) to be assigned to a user other than the
one established with the SSID (such as 5), the client is assigned to the VLAN sent by the server (10).
server is configured to allow a different VLAN (such as 10) to be assigned to a user other than the
one established with the SSID (such as 5), the client is assigned to the VLAN sent by the server (10).
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
. Click Technology Support, select Wireless from
the menu on the left, and click Wireless LAN.
Related Documentation
These documents describe the installation and configuration of 1100 and 1200 series access points:
•
Quick Start Guide: Cisco Aironet 1100 Series Access Points
•
Quick Start Guide: Cisco Aironet 1200 Series Access Points
•
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points