Cisco Cisco Aironet 1260 Access Point Guía De Instalación

Descargar
Página de 12
 
5
EU Directives 1999/5/EC & 93/42/ECC - Compliance Information for the Cisco Aironet 1260 and 3500 series IEEE802.11 a/b/g/n Wireless LAN
78-19393-02
  CE Marking
This device also conforms to the EMC requirements of the Medical Directive 93/42/EEC and as 
contained in EN 60601-1-2: 2001.
CE Marking
For the Cisco AIR-(L)AP1260 Series & Cisco AIR-CAP3500 Series Access Points, the following CE 
mark and Class-2 identifier are affixed to the equipment and its packaging:
National Restrictions
Within the EU as well as within the majority of the other European Countries, the 2.4- and 5-GHz bands 
have been made available for the use of wireless LANs. Table 1 provides an overview of the regulatory 
requirements in general applicable for the 2.4- and 5-GHz bands.
Later in this section you will find an overview of countries in which additional restrictions or 
requirements or both are applicable.
The requirements for any country may evolve. Cisco recommends that you check with the local 
authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.
Denmark
In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
Table 1
Overview of Regulatory Requirements for Wireless LANs
Frequency Band (MHz)
Max Power Level
(EIRP)
1
 (mW)
1.
Effective isotropic radiated power (EIRP).
Indoor ONLY
Indoor and Outdoor
2400–2483.5
100
X
5150–5350
2
2.
The AIR-AP1261N-E-K9, AIR-LAP1261N-E-K9, AIR-CAP3501I-E-K9 and AIR-CAP3501E-E-K9 operate only in 
2400 - 2483,5 MHz band.
The following sections identify countries having additional requirements or restrictions than those listed 
in Table 1.
200
X
5470–5725
2
1000
X