Cisco Cisco Aironet 1250 Series Access Point Guía De Instalación
22
OL-16710-02
Make sure that you are using a computer connected to the same network as
the access point, and obtain the following information from your network
administrator:
the access point, and obtain the following information from your network
administrator:
•
The access point host name.
•
The case-sensitive SSID for your 802.11radio network.
•
A Simple Network Management Protocol (SNMP) community name and
the SNMP file attribute (if SNMP is in use).
the SNMP file attribute (if SNMP is in use).
•
The Media Access Control (MAC) address from the label on the bottom
of the access point (such as 0016462584c), if you plan to use the Cisco
IP Setup Utility to find an access point IP address.
of the access point (such as 0016462584c), if you plan to use the Cisco
IP Setup Utility to find an access point IP address.
•
If your network is not connected to a DHCP server, the access point IP
address, default gateway, and subnet mask.
address, default gateway, and subnet mask.
In Case of Difficulty
If you followed the instructions in previous sections of this guide, you should
have had no trouble getting the radio module installed and running. If you do
experience difficulty, the following sections provide basic troubleshooting
information.
have had no trouble getting the radio module installed and running. If you do
experience difficulty, the following sections provide basic troubleshooting
information.