Cisco Cisco Aironet 1250 Series Access Point Guía De Instalación
25
Cisco Aironet 1250 Series Radio Upgrade Instructions
For more details on these LED status codes, see the “Troubleshooting”
chapter of the Cisco Aironet 1250 Series Access Point Hardware Installation
Guide.
chapter of the Cisco Aironet 1250 Series Access Point Hardware Installation
Guide.
Compliance Information
This equipment has been tested and found to comply with the European
Telecommunications Standard ETS 300.328. This standard covers Wideband
Data Transmission Systems referred to in CEPT recommendation T/R 10.01.
Telecommunications Standard ETS 300.328. This standard covers Wideband
Data Transmission Systems referred to in CEPT recommendation T/R 10.01.
This type-accepted equipment is designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed in accordance with the instruction manual, may
cause harmful interference to radio communications.
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed in accordance with the instruction manual, may
cause harmful interference to radio communications.
–
Blinking
amber
amber
–
Maximum retries or buffer
full failure on radio.
full failure on radio.
Red
Red
–
Software failure.
–
–
Cycling
blue, green,
red, off
blue, green,
red, off
General warning; insufficient
inline power.
inline power.
Ethernet LED
Radio LED
Status LED
Meaning