Cisco Cisco Aironet 1200 Access Point Guía De Instalación
27
Note
If your access point contains an internal 2.4-GHz radio card, a
2.4-GHz radio product compliance card should be attached to the
access point.
2.4-GHz radio product compliance card should be attached to the
access point.
10. Remount the access point.
11. Install the antenna or external antenna cable (connectorized version
only). If you are installing one antenna, connect it to the connector
marked Right/Primary as shown in this illustration.
marked Right/Primary as shown in this illustration.
Note
5-GHz antennas must be installed. Cisco-approved 5-GHz antennas
are identified by a blue dot on the antenna near the connector or a
blue band on the antenna cable near the connector.
are identified by a blue dot on the antenna near the connector or a
blue band on the antenna cable near the connector.