Cisco Cisco Aironet 1250 Series Access Point Guía De Instalación

For 2.4 GHz, the output power is restricted to 10 mW EIRP when the product is used outdoors in the 
band 2454 - 2483,5 MHz. There are no restrictions when used indoors or in other parts of the 2,4 GHz 
band. Check 

 for more details.

Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements utilisés en 
extérieur dans la bande 2454 - 2483,5 MHz. Il n'y a pas de restrictions pour des utilisations en intérieur 
ou dans d'autres parties de la bande 2,4 GHz. Consultez

 pour de plus amples détails.

This product meets the National Radio Interface and the requirements specified in the National 
Frequency Allocation Table for Italy. Unless operating within the boundaries of the owner’s property, 
the use of this 2.4 GHz Wireless LAN product requires a ‘general authorization’. Please check with 

 for more details.

Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale 
di ripartizione delle frequenze in Italia. Se non viene installato all'interno del proprio fondo, l'utilizzo di 
prodotti Wireless LAN a 2.4 GHz richiede una "Autorizzazione Generale". Consultare 

 per maggiori dettagli.

The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications 
Office. Please check 

http://www.esd.lv

 for more details.

2,4 GHz frekven?u joslas izmantošanai ?rpus telp?m nepieciešama at?auja no Elektronisko sakaru 
direkcijas. Vair?k inform?cijas: 

http://www.esd.lv

. 

Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 
1999/5/EC has also been implemented in those countries.

The regulatory limits for maximum output power are specified in EIRP. The EIRP level of a device can 
be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at 
the connector (specified in dBm).

The 1250 series wireless LAN products are equipped with reversed polarity TNC antenna connectors to 
allow the use of dedicated (external) antennas available from Cisco. 

 list the 2.4 GHz antennas that can be used by the AIR-(L)AP1252AG-E-K9, 

AIR-(L)AP1252G-E-K9 or AIR-RM1252G-E-K9 while 

 list the 5 GHz antennas that can be used 

by the AIR-(L)AP1252AG-E-K9 or AIR-RM1252A-E-K9. All antennas where assessed together with 
the equipment against the requirements of the R&TTE directive. The tables also list the maximum power 
setting for each of the antennas.