Cisco Cisco Aironet 1040 Series Access Point Notas de publicación
2
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Releases 12.4(25d)JA and 12.3(8)JEE
OL-23880-01
System Requirements
You can configure and monitor 520, 1040, 1100, 1130, 1140, 1200, 1240, 1250,1260 access points, and
1300 and 1400 series access points and bridges by using the command-line interface (CLI), the
web-browser interface, or Simple Network Management Protocol (SNMP).
1300 and 1400 series access points and bridges by using the command-line interface (CLI), the
web-browser interface, or Simple Network Management Protocol (SNMP).
System Requirements
You can install the 32-Mb Cisco IOS Release 12.4(25d)JA on all 1040, 1130, 1140, 1240, 1250 and 1260
series access points. You can also install the16-Mb Cisco IOS Release 12.3(8)JEE on all 520, 1100, and
1200 series access points.
series access points. You can also install the16-Mb Cisco IOS Release 12.3(8)JEE on all 520, 1100, and
1200 series access points.
Finding the Cisco IOS Software Release
To find the version of Cisco IOS software running on your access point, use a Telnet session to log into
the access point, and enter the show version EXEC command. This example shows command output
from an access point running Cisco IOS Release 12.4(25d)JA:
the access point, and enter the show version EXEC command. This example shows command output
from an access point running Cisco IOS Release 12.4(25d)JA:
ap1260AG> show version
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 12.4(25d)JA
Copyright (c) 1986-2010 by Cisco Systems, Inc.
On access points running Cisco IOS software, you can also find the software release on the System
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Upgrading to a New Software Release
Follow these steps for instructions on upgrading your access point or bridge software:
Step 1
Follow this link to the Cisco home page:
Step 2
Click Support. The Support and Documentation page appears.
Step 3
Under the Select a Product Name, click Wireless. The Product/Technology Support page appears.
Step 4
Under the Make a Selection to Continue section, click Access Point. Products and Access Point are
highlighted.
highlighted.
Step 5
Select the access point model for which you need the information. For example, click the Cisco Aironet
1260 Series. A list of documents appears.
1260 Series. A list of documents appears.
Step 6
Click Configure. A list of configuration documents appears.
Step 7
Click Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, 12.4(25d)JA.
Step 8
Navigate to the Managing Firmware and Software chapter.
For information on Cisco IOS software, click this link to browse to the Cisco IOS Software Center on
Cisco.com:
Cisco.com: