Cisco Cisco Aironet 2600e Access Point Guía De Instalación

The 2602I model access points are configured with up to four dual-band inverted-F antennas and two 2.4-GHz/5-GHz 
dual-band radios.

There are four antennas deployed inside the access point with one deployed on each corner of the access point top housing.  
Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line.  The basic features are as follows:

Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.

Antenna unit integrated into 2602I model access points.

Peak gain is approximately 4 dBi in the 2.4-GHz band and approximately 4 dBi in the 5-GHz band.

The 2600 series supports the following regulatory domains (shown as “x” in the model numbers):

-A, -C, -E, -I, -K, -N, -Q, -R, -S, -T, -Z

Click this URL for the latest list of countries and regulatory domains supported by the AP models: 

The 2600 series also supports the universal regulatory domain, -UX, which has the following model number formats:

AIR-AP2602I-UXK9

AIR-AP2602E-UXK9

For information on how to set the regulatory domain and country configurations of a universal regulatory domain 
access point, see the Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide, at: 

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

Click this URL to browse to a list of countries and regulatory domains supported by the 2600:

The 2602E model access points have external antenna connectors and the LED indictor on the top of the model, as shown in 

. The 2602I model access points have integrated antennas and do not have external connectors on the top of the unit; 

however, they do have the LED indicator on top of the unit, as shown in 

.