Cisco Cisco Aironet 702W Access Point Hoja De Datos
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Item
Specification
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors
● Per-port status for local Ethernet ports
Dimensions
(W x L x H)
(W x L x H)
● Access point (without mounting bracket): 6 x 4 x 1.6 inches (152.4 x 101.6 x 40.6 mm)
Weight
Access point (without mounting bracket): 0.86 lb (0.39 Kg)
Environmental
Cisco Aironet 700W
● Non-operating (storage) temperature: -22 to 158°F (-30 to +70°C)
● Non-operating (storage) maximum altitude: 25°C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating maximum altitude: 40°C, 9843 ft.
● Non-operating (storage) maximum altitude: 25°C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating maximum altitude: 40°C, 9843 ft.
System
● 128 MB DRAM
● 128 MB flash
● 560MHz System CPU
● 128 MB flash
● 560MHz System CPU
Input Power
Requirements
Requirements
● 44 to 57 VDC
● Optional - Power Supply and Power Injector: 100 to 240 VAC; 49 to 60 Hz
● Optional - Power Supply and Power Injector: 100 to 240 VAC; 49 to 60 Hz
Powering Options
● 802.3af/at Ethernet Switch
● Optional - Cisco Power Injectors (AIR-PWRINJ5=, AIR-PWRINJ4=)
● Optional - Cisco Local Power Supply (AIR-PWR-C=)
● Optional - Cisco Power Injectors (AIR-PWRINJ5=, AIR-PWRINJ4=)
● Optional - Cisco Local Power Supply (AIR-PWR-C=)
Power Draw
● Maximum values: 11.6W with no PoE out, 22.1W with PoE Class 2 out, and 29.2W with PoE Class 0 out
● Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling
● Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling
on the Uplink port and the 100m of cabling on the PoE Out port.
Accessories
● Mounting brackets: AIR-AP-BRACKET-W
● Cisco Local Power Supply: AIR-PWR-C= (sold separately)
● Cisco Local Power Supply: AIR-PWR-C= (sold separately)
Warranty
Limited Lifetime Hardware Warranty
Compliance
Standards
● Safety:
◦ UL 60950-1
◦ CAN/CSA-C22.2 No. 60950-1
◦ IEC 60950-1
◦ EN 60950-1
◦ CAN/CSA-C22.2 No. 60950-1
◦ IEC 60950-1
◦ EN 60950-1
● Radio approvals:
◦ FCC Part 15.247, 15.407
◦ RSS-210 (Canada)
◦ EN 300.328, EN 301.893 (Europe)
◦ ARIB-STD 33 (Japan)
◦ ARIB-STD 66 (Japan)
◦ ARIB-STD T71 (Japan)
◦ AS/NZS 4268.2003 (Australia and New Zealand)
◦ EMI and susceptibility (Class B)
◦ FCC Part 15.107 and 15.109
◦ ICES-003 (Canada)
◦ VCCI (Japan)
◦ SRRC (China)
◦ EN 301.489-1 and -17 (Europe)
◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
◦ RSS-210 (Canada)
◦ EN 300.328, EN 301.893 (Europe)
◦ ARIB-STD 33 (Japan)
◦ ARIB-STD 66 (Japan)
◦ ARIB-STD T71 (Japan)
◦ AS/NZS 4268.2003 (Australia and New Zealand)
◦ EMI and susceptibility (Class B)
◦ FCC Part 15.107 and 15.109
◦ ICES-003 (Canada)
◦ VCCI (Japan)
◦ SRRC (China)
◦ EN 301.489-1 and -17 (Europe)
◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
● IEEE Standard:
◦ IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d
● Security:
◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦ 802.1X
◦ Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
◦ 802.1X
◦ Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)